Sentence examples for microstructure by using from inspiring English sources

Further work is under way to predict crack growth in the presence of explicit grain microstructure by using a crystal plasticity model combined with XFEM technique.

In order to accomplish this, previous works have increased the movable mass by laser ablation deposition [[1]], increased the stiffness of the mechanical spring by polysilicon deposition [[2]], and decreased the stiffness of the in-plane vibrating microstructure by using a focused ion beam [[3]].

The edge irregularities can be overcome on SEBS films with hexagonal-spherical microstructure by using ATHN manual procedures [19]; while the hammering process and overall operation are very difficult, being limited to hammering individual lines in any single step of the procedure.

Using 100% water, as-deposited films are amorphous and transform to α-alumina only upon annealing, while this equilibrium phase is directly obtained but with a porous microstructure by using 100% methanol.

The possibility of the control of "intrinsic" and "extrinsic" brittleness in polycrystalline materials by the grain boundary engineering is proposed on the basis of the optimization of the grain boundary microstructure by using newly introduced parameters, i.e., the grain boundary character distribution (GBCD) and the grain boundary connectivity.

Tailoring of the microstructure by using different heat treatments can transform the SLM α′ phase to the more ductile α + β phase which render these materials comparable to their wrought counterparts [ 47, 52, 84, 88].

Microstructure investigation by using the scanning electron microscope (SEM) of the fracture MnO2-doped Y-TZP samples which was subjected to rapid quenching in liquid nitrogen revealed distinct microstructural features believed to be associated with the presences of a transient liquid phase during sintering.

Fig. 6 SEM image of Mg/MgO microstructures generated by using laser ablation of magnesium target in acetone.

The analysis of composites with random microstructure is done by using of a fictitious hexagonal microstructure.

Microstructure was formed by using the photolithography and etching method for the electrochemical.

Microstructure was identified by using scanning electron microscopy and X-ray diffraction.