Sentence examples for microscope were utilized from inspiring English sources

FTIR, XPS, TGA, SEM and laser scanning confocal microscope were utilized to investigate the chemistry and morphology of functional layer.

Acoustic emission (AE) equipment and optical microscope were utilized to capture the edge-delamination initiation and characterize the failure modes during delaminating.

To explore the morphology of the samples, a Tescan-MV 2300 scanning electron microscope and Zeiss-Sigma field-emission scanning electron microscope were utilized.

Link ISIS energy-dispersive spectrometers [EDS] attached to the scanning electron microscope and the high-resolution transmission electron microscope were utilized to determine the chemical composition of the produced samples.

To evaluate the characteristics of the PFC/ICG nanoemulsions, a JEOL FE-TEM (transmission electron microscope) was utilized, and the TEM images were captured at 200 kV using a device from Tecnai.

For the micrographic observation, the Ti64 specimens were polished and etched using a solution of Kroll's reagent (85 mL H2O + 3 mL HNO3 + 5 mL HF) (Gammon et al. 1985), and an optical microscope was utilized.

A double-headed light microscope was utilized.

A Carl Zeiss LSM510 inverted confocal microscope was utilized for identification of neurons throughout specimens.

A Leica SP5 scanning confocal light microscope was utilized as described previously (Kelsey et al., 2012a; Kelsey et al., 2012b).

Hand-held microscopes were utilized to precisely measure the shear crack width with an accuracy of 0.025 mm (0.001 in).. Figure 15a d shows the plot of the normalized shear force and corresponding shear crack width in Beams R1 R4 (having web-shear mode of failure) measured on four different sides of the beams, during the test.

Optical microscope (OM), scanning electron microscope (SEM) and transmission electron microscope (TEM) were utilized to clarify prior LCF damages of various strain amplitudes on subsequent creep behaviors.