Sentence examples for microscope to control from inspiring English sources

Finally, the slides were examined with a Nikon A1R laser scanning confocal microscope and the positive cells were counted with NIS elements AR software, which is equipped for Nikon DS series digital cameras in laser confocal microscope to control microscope and capture microscopic image.

To address this challenge, a variant technique called polymer pen lithography uses an array of soft polymer pens instead of an AFM tip and a scanning probe microscope to control the movement of the array [ 55].

Sputum "plugs" were selected from saliva and controlled by microscope to assure good separation from squamous cells [ 21].

For all the PL measurements, a 325-nm continuous-wave He-Cd laser (20 mW) was used as the excitation source, and the objective lens (×5) of a reflecting microscope was used to control the beam spot size (~20 μm) and simultaneously collect the signal.

The NIS-Element (Nikon, JP) was used as platform to control microscope, illuminator, camera and post-acquisition analyses.

An atomic force microscope is advantageously used to control and modulate these 2 types of stretching effects.

It is proposed that, by using active feedback hardware to control microscope focus and XY-sample location, Usystem can be reduced to the order of 0.005 nm.

In this report, we address all the aforementioned shortcomings by describing the design and construction of an optical trapping system integrated with a spinning disk confocal microscope and describe its use to control and position live pathogens at arbitrary locations on the microscope stage over timescales of seconds.

An atomic-force microscope assisted technique is developed to control the position and size of self-assembled semiconductor quantum dots (QDs).

Fine, thin and flat magnetic poles allow the use of high magnification microscope objectives, and flexible software to control the direction and pattern of applied forces supports a variety of experimental situations.

Images were acquired using KAMS-acquire, a custom software program developed in-house [72], to control the microscope and camera.