A rigid membrane placed between the micro-pillars and the acoustic medium ensures high mechanical coupling.
Moreover, the additional deposition time also enlarged the size and diameter of the micro-pillars and micro-walls compared to the sample prepared for 30 min as shown in Fig. 3c.
The surface with hierarchical micro-nano-pillars herein had the least ice adhesion, which was far less than the surface with micro-pillars and smooth surface without any structure (MN < M < S).
The performance of the newly designed hybrid heat sink was compared with the basic designs of parallel flow micro-channels, micro-channels with micro-pillars, and micro-jet impingement heat sinks.
In contrast, on P-5 × 5 × 5 actin only forms short fibers, which are concentrated on the edges and tops of the micro-pillars and demonstrate an adaptation of actin filament formation to the underlying surface topography [ 8].
Within the individual micro pillars, fabricated by focused ion beam milling, the ferrite and cementite lamellae were aligned parallel, normal or inclined to the loading direction.
Both the static contact angle and the roll angle increased with the increase of micro pillars' height.
Preliminary experimental results obtained from TiN/Ti/Si micro pillars are presented.
Direct failure of coating/substrate interfaces has been induced through compression loading of micro pillars containing inclined coating/substrate interfaces.
With the increase of micro pillars' spacing, the roll angle decreased, but the change of static contact angle was irregular.
Micromechanical experiments with 3 × 3 × 6 μm3 sized micro pillars were used to examine orientation dependencies of the mechanical properties in a severely plastically deformed high strength steel and compared with the undeformed state.
