Sentence examples for methods for conventional from inspiring English sources
With the advent of HEAs, fundamental issues that challenge the proposed theories, models, and methods for conventional alloys also emerge.
The adequacy of strength predictions incorporated in current design methods for conventional reinforced concrete members are also examined in the paper.
The algorithm is used to optimize the parameters of the LS-SVM on the basis of traditional prediction methods for conventional concrete.
The LBM is used in this study, because from the microscopic point of view, the existing computational methods for conventional two-phase flows may fail to reveal the inherent nature of the flow and energy transport process inside a nanofluid.
There are various adhesion methods for conventional wall climbing robots: suction force, sticky materials, magnetic force, a mechanical combination, etc. Figure 2 shows examples of conventional wall climbing robots that employ the aforementioned adhesion methods.
The purpose of this article is to review USP and non-pharmacopeial dissolution testing methods for conventional and novel pharmaceutical dosage forms and give an insight to possible alternatives in drug dissolution study design and appropriate choices for dissolution media.
The 28-day compressive strengths of OPS concrete designed according to the ACI method for conventional concrete and methods mentioned in references [A.
Manufacturer guidelines (and default settings on the CT scanner) indicated that ASiR-40 is the optimum reconstruction method for conventional dose images; hence the CD images were not reconstructed using higher levels of ASiR.
By including this additional failure mode, the design method for conventional column was adapted to estimate the bearing capacity of composite foundation consisting of T-shaped column and soft clay, and the method was validated by the experimental data.
With respect to phase adjustment, there are lots of phase compensation methods available for conventional ISAR.
Traditional resource assessment methods, designed for conventional reservoirs, cannot handle the two pore systems properly.
