Sentence examples for methods for clay from inspiring English sources

The study of identification methods for clay minerals is very important because of the very fine particle size (less than 2 μm) of these materials, which makes it difficult to recognize them with the naked eye.

According to O'Flaherty (1988) the range of values that may be anticipated when using the modified proctor test methods are: for clay, MDD may fall between 1.4 and 1.7 g/cm3 and optimum moisture content (OMC) may fall between 20-30%.

Note that there is a normal odor emitted by hot polymer clay which is not the same as burning (if the normal odor is bothersome, put a toaster oven in the garage or another room for baking or use one of the "protected methods" for baking the clay to enclose it).

One of the methods for obtaining absorbent clays with high adsorption capacity is their modification by polymers.

In this study, we tested the suitability of the Tsunakawa Shaw paleointensity method for analyzing baked clay samples collected from the floor of the Sayama Higashiyama-Oku kiln by comparing the results with those collated using the IZZI-Thellier method.

Columnar inclusion is one of the effective and widely used methods for improving the engineering properties of soft clay ground.

The needle penetration resistance, uniaxial compressive strength, tensile strength and elasticity modulus of clay-bearing rocks with different water contents were explored by laboratory tests, and a method for estimating the clay-bearing rock strength and deformability was proposed (Erguler and Ulusay 2009).

Stosur's game seems tailor-made for clay.

Each sample was analyzed for clay content then averaged for a 0 7 m clay content (%clay) for each hole.

Under natural conditions, the depth of seasonal melting is 1.5 1.7 m for clay loams, 1.6 2.0 m for sand clays, and 2.0 2.5 m for sands.

Look for clay masks that contain bentonite and kaolin clay.