Sentence examples for method the peak from inspiring English sources

According to the proposed method, the peak story drifts obtained from the response spectrum analysis (RSA) can be resolved into their translational and rotational components, and the related equivalent static lateral forces and torsional moments can be calculated.

In processing practical pipeline vibro-acoustic signals, with the proposed method the peak of adaptive time delay estimate of leak signals, which determines the location of a leakage, becomes more distinguished, and thus the error of leakage location is improved.

Furthermore, for our sputtering method, the peak current of methanol oxidation on the Pt Ru/TiO2/C is enhanced by increasing the TiO2 deposited amount up to 2.8 wt.%.

According to this method, the peak current is related to the surface concentration of electroactive species by the following Eq. (2): {I}_{mathrm{p}} = {n}^2{F}^2 AvarGamma upsilon /4mathrm{R}mathrm{T} (2).

In this more sensitive method, the peak at −1293 mV became more intense in each scan indicating that it is caused by oxygen.

In our GDWavelet method, the peak height ratio, which is defined as the ratio of current peak height over average height of peaks, is changed from 0 to 10 to build the ROC curve.

We submitted those peaks predicted to contain the ChIP'd TF's motif by the HADB method, the peaks without the HADB predicted ChIP'd TF's motif and peaks from the whole dataset.

Compared with the 2-AB method, the peaks were sharper (e.g. the peak width of peak 63 is 0.72 min (2-AB) compared with 0.25 min (2-AA)) and more condensed.

A similar approach to the method determining the peak voltage of the input signal is also used to determine the time delay between the signal before and after the DUT.

The design method for the peak headform linear acceleration was confirmed; it was hardly affected by the tangential component of the impact velocity.

The method uses the peak force during impact obtained from energy balance, a Hertzian contact formulation and energy minimization to determine the complete state of stress in the laminate.