Sentence examples for method red curve from inspiring English sources

In the case of the ζ-factor method (red curve), thanks to the point-by-point absorption correction, the N/(Ga+Al) ratio remains equal to one, as expected from the (Al,Ga N stoichiometry.

The presented LSAC method (red curve) solved this problem, and more FPs were reduced.

The function (6) was fitted to the points of the discrete cumulative distribution by the use of the Levenberg Marquardt method (see the red curve in Figure 6) [44].

As a result, DCPred2 achieved an AUC score of 0.88 (the green curve in Figure 6), in comparison with the AUC of 0.75 for the TS-based method (DCPred1) (the red curve in Figure 6).

An ideal connectivity method should follow the red curve depicted in Figure 3C, so that TFR is equal to 1 till TFS reaches the maximum number of connections actually present in the SWM.

The blue curve is for the same growth as shown in Figure 1 where the Ga-deoxidization method is used, whereas the red curve is for a substrate dipped in 5% HF for 10 s and rinsed with Millipore water (> 18 MΩ resistance) for 1 min, which forms a thin oxide layer.

Fig. 10 Comparison of vertical-component velocity seismograms obtained by the frequency wavenumber integral method of Saikia (1994) (black curve) and OpenSWPC (red curve) in the frequency range of 0.01 0.5 Hz under the laterally homogeneous structure of Kubo et al.

We see from the figure that the area under the ROC curve of our RNMF (the red curve) is larger than those of the SVM method (the blue curve) and the wvRN+RL method (the green curve), which implies that the RNMF method is able to deliver better performance against the baselines for protein localization prediction.

Concerning the Al concentration, Fig. 2d shows the variation of the Al/(Ga+Al) ratio calculated using the ζ-factor (red curve) and k-factor (blue curve) methods.

The four groups of sequences are: (i) correctly classified NSI sequences (A, blue curve), (ii) correctly classified SI sequences (A, red curve), (iii) NSI sequences misclassified by all three methods (B, blue curve) and SI sequences misclassified by all three methods (iv) (B, red curve).

The red curve in Fig. 2(b) is the reflectance spectrum calculated using the transfer matrix method.