Sentence examples for method of desirability from inspiring English sources

In sum, the method of desirability function based on a neural network was a useful tool to optimize several responses for fermentative hydrogen production processes simultaneously.

The maximum substrate degradation efficiency of 95.3%, hydrogen yield of 305.3 mL/g glucose and average hydrogen production rate of 23.9 mL/h were all obtained at the optimal temperature of 39.0 °C, initial pH of 7.0 and glucose concentration of 24.6 g/L identified by the method of desirability function based on a neural network.

QuEChERS extraction was optimized by using a full factorial design followed by the multicriteria method of the desirability functions.

Applying the method of the desirability function, optimization of adsorbent dose (29 g), initial concentration (60 mg L−1), T (40 °C) and pH (4) gave a maximum of 82.34% fluoride removal white desirability of 0.916 by Apatitic tricalcium phosphate.

A central composite design was applied to investigate the effects of both loading and eluting cycles in the MEPS procedure; subsequently the multicriteria method of the desirability functions allowed to find the best conditions for the simultaneous extraction of both the analytes.

Upon applying the method of maximizing the desirability function, optimization of the factors gave the lowest warpage and shrinkage for nanocomposite PLA bone screw (PLA9).

ACASI has been shown to be an effective method of decreasing social desirability bias and thereby enhancing veracity of self-report of sensitive behaviors, including sexual and substance use risk acts [ 24, 25].

Another difficulty arises from the weighting method for the aggregation of desirability functions since weight parameters have no physical meaning.

In the proposed method, the concept of degree of desirability and the preference function are introduced.

The obtained optimal point by means of Monte Carlo simulation method and desirability function corresponds to a feed temperature of 57.69 °C, a feed acetonitrile concentration of 6.96 wt% and a downstream pressure of 28.95 kPa.

Results of this analysis rank the materials in order of desirability and provide a method to reorder this ranking based on the priority assigned to each objective.