Sentence examples for method at optimum from inspiring English sources
The accuracy and ability of method at optimum values predicted by this model was studied by conduction of similar experiments at the same previously optimized conditions.
In this article, we show the synthesis of vanadium oxide (V2O5): Nickel Oxide (NiO) composite using sol-gel method at optimum conditions.
Devices were fabricated using the perovskite films made based on the two-step sequential spin-dip method at optimum process conditions (run 1 of Table 1), as well as the one-step method.
In this study, the volumetric properties, Marshall stabilities, the indirect tensile stiffness moduli, and the fatigue and permanent deformation strengths of hot mix asphalts prepared with the same performance grade binders in accordance with Superpave method at optimum binder contents were comparatively investigated.
The kinetic parameters, apparent K m and V max values were calculated according to the Lineweaver-Burk method at optimum pH and temperature using linear arabinan as substrate at concentrations ranging from 1.25 to 30 mg ml−1.
The acetaminophen removal efficiency for electro-Fenton was 98% and chemical oxygen demand (COD) removal of 43% while a 97% acetaminophen removal and 42% COD removal were observed for the photoelectro-Fenton method operated at optimum conditions.
A previous report [13] showed an increase in photoconductivity of undoped In2O3 thin films to about 102 (Ω cm)−1 by using a two-step thermal annealing method at an optimum temperature of ≤500°C.
Each treated phase was dried well to reuse for next experiment under the same conditions of batch method at the optimum pH values for extraction of both Cd II) and Zn II).
If N is the size of FFT and the CFDD's overlap and add method is running at optimum level with the filter length equivalent to half that of FFT, then the average computational cost over five blocks is 19.2 × N log2N + 1,976.2 N operations.
The limit of detection of the method presented was 2.16 ppb at optimum conditions.
At optimum conditions method has linear response over 2.0 500.0 ng mL−1 with detection limit of 0.5 ng mL−1 with relative standard deviations (RSDs) less than 5.0%.
