Your English writing platform
Discover LudwigSuggestions(2)
Exact(4)
The samples were then subjected to a methane flow of 500 cm3/min−1 for 5 min.
The maximum methane flow of the extraction borehole reached 4.9 m3/min and the average methane flow reached 1.9 m3/min.
Again Li et al. have shown at 1035 °C with methane flow of 7 sccm and pressure 160 m Torr led to the largest graphene domains with average areas of 142 μm2.
25 μm thick copper foils were first heated to 1000◦C in a flow of 2 sccm (standard cubic centimeters per minute) hydrogen at low pressure and then exposed to methane flow of 35 sccm and pressure of 500mTorr and acquired sheet resistances of 125Ω/W for a single layer.
Similar(56)
(Natural gas liquids are hydrocarbons, like propane and butane, that are separated from the methane flowing out of a natural gas deposit).
The methane flow rates of the high return airway inclined boreholes of panel 1112 1) are shown in Fig. 11.
Open image in new window Fig. 8 Methane flow curve of the face-advancing inclined boreholes.
Open image in new window Fig. 11 Methane flow curve of the high return airway inclined boreholes.
At a methane flow rate of 600 cc/min, we primarily obtained double-walled carbon nanotubes having predominantly semiconducting properties.
In this paper, two mining parameters for the characterisation of methane emission, the methane emission rate (volume of methane emitted per ton of excavated rock) and average methane flow rate (volume of methane emitted per day), are introduced.
It was also found that hydrogen from methane has been mostly evolved to the outlet gaseous product and the amount of CO formation is much higher than that of CO2; the operation of intermittent methane flow can further increase the amount of CO over that of CO2; these are beneficial for the co-generation of synthesis gas.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com