Sentence examples for methane conversion efficiency from inspiring English sources
Also, an effective method has been identified to improve methane conversion efficiency.
Results show that the temperature uniformity of the longitudinal and radial directions is crucial for the methane conversion efficiency.
The improvements in methane conversion efficiency is 18%, energy loss percentage 20.7%, and reforming efficiency 33.9%, respectively with the best parameter settings by an OBSiC PM.
The influence of support material, Rh loading and the presence of water vapor on the methane conversion efficiency and the product gas composition was studied.
The solubilization-removal of solid matters and methane conversion efficiency gradually increased with increasing applied voltage, with an average methane yield of approximately 248.2 ± 21.0 mL L−1 d−1 at 1.0 V.
Finally, DBD-catalysts hybrid reaction is proposed and a synergistic effect between plasma-generated reactive species and catalysts is clarified, suggesting that vibrationally excited species are important for enhancing overall methane conversion efficiency with catalysts.
Methane conversion efficiencies of > 99% were observed, and some of the reactor tubes have been operated for more than 1000h.
The monitored indicators that were used for assessing the reactor stability were methane COD conversion efficiency and VFA accumulation.
The simulation and exergy analysis results indicate that when the inlet conditions are the same, for a given methane conversion, the exergy efficiencies η2 and η1 of conventional CPO reactor with pure oxygen is lowest among the three reactors, because of the large amount of accumulative exergy required for obtaining pure oxygen.
Direct electricity production by MFCs is advantageous, compared to methanogenic reactors that require combustion of the methane to produce power, as the conversion efficiency of methane to electricity is typically only 33%.
The influences of RE on the methane conversion and the thermal efficiency are more significant at higher PRs.
