Sentence examples for metering method is from inspiring English sources

In the present study, a cost-effective metering method is developed on the basis of a V-Cone meter.

The current meter method is accurate, time effective and suitable for hilly terrains (United States Geological Survey 2007) and so can be used commercially (United States Department of Agriculture 2001).

Guarded heat flow meter test method is used to measure the thermal conductivity of these composites using the instrument Unitherm™ Model 2022 as per ASTM-E1530.

Here, the favored method is not meters, but a measurement derived from satellite images.

For heavy traffic, far away from a road, the noise attenUptoon due to air absorption cannot be ignored.

The bias of the measurements obtained from the GlucoRx Nexus TD-4280 BG meter relative to the reference method is shown in Figure 2. As illustrated by Figure 2, the average bias of the GlucoRx Nexus TD-4280 was 11.45 ± 25.77 mg/dL (0.64 ± 1.43 mmol/L) which equates to a percentage of 7.1% ± 14.91%.

Using the Ohm meter or continuity test light method is the safest way to test fuses.

For wind speeds above 40 meters per second (about the speed of a strong Category 1 hurricane), the method is accurate to within about 5 meters per second, or about 11 miles per hour.

The new method is demonstrated on a steam-metering system for a methanol synthesis unit.

This method is also compared with short slot and penetrability meter.

The effectiveness and versatility of this method is illustrated on a class of objective functions for a ramp metering problem.