Sentence examples for metallic layers in from inspiring English sources

We have designed photodetectors based on a combination of nanocrystalline diamond (NCD) and bilayer metallic layers in a metal-semiconductor-metal (MSM) structure.

Furthermore, we can define the fill fraction of the total thickness of metal in the system to the total thickness of the metamaterial as follows: ρ = d m d m + d d (6 where dm is the sum of all the thicknesses of metallic layers in the system and dd is the sum of all the thicknesses of the dielectric layers.

Our calculations take into consideration the interaction (damping) of an oscillating electric dipole with the metallic layers in the superlens.

The metallic layer in PCFs absorbs visible light; this phenomenon can reduce their efficiency.

An initial Ni Cr layer was primarily deposited by thermal spray, followed by a successive Al metallic layer in a second stage.

This is because the CAFM measurements presented in this section have been performed with Si tips coated with a metallic layer in ambient conditions, drastically reducing its lateral resolution to approximately 20 nm [26].

SHP uses a thin metallic layer, in this work palladium, between a hydrogen generating plasma and the sample, which shields the silicon sample from damaging UV and energetic ions while releasing low energy, neutral, atomic hydrogen onto the sample.

133 Raman spectroscopy provides a fairly good spatial resolution and does not require any specific sample preparation, but it is limited to bare Si structures as the top metallic layer in the device prohibits the laser penetration.

Additionally, for the metamaterial absorber, its 100% absorption can be mainly derived from two aspects, the ohmic loss in metallic layers and the absorption in the dielectric slab using the lossy dielectric.

In the frequency bands of terahertz and microwave [6, 18, 23 25, 39, 50], the ohmic loss in metallic layers is usually smaller than the absorption in the dielectric layer.

to guarantee a low thermal emissivity in the infrared thanks to the metal layers.  . to act as antireflection coating so to minimize the sample reflectance in the visible [56 59]; to maximize the absorbance in the metallic layers; to guarantee a low thermal emissivity in the infrared thanks to the metal layers.