Sentence examples for metallic adhesive from inspiring English sources
The phrase "metallic adhesive" is correct and usable in written English
It can be used to describe an adhesive that contains metal or is designed for bonding metal surfaces. Example: "For this project, we recommend using a metallic adhesive to ensure a strong bond between the metal components."
The air-blast dried sample was affixed to "stubs" using double-sided metallic adhesive tape and then coated with gold using sputter coater (WI-RES-Coater-001).
The metallic adhesive used to install the FBG in a one-end-free configuration showed superior bonding reliability during temperature cycles ranging from 25 °C to 345 °C.
In this study, a FBG acoustic sensor using a metallic adhesive for installation and a relatively economical copper/carbon (Cu/C -coated fiber is developed for ISHM of high temperature NPP struCu/C -coated
The FBG reflectivity was stabilized at a 58% drop from the initial reflectivity, and the Cu/C-coated FBG sensor using the metallic adhesive could successfully detect the acousto-ultrasonic waves generated by pencil lead breaking and laser beam excitation.
In the present research, the influence of the adhesive thickness on the cohesive properties and the overall strength of metallic adhesive bonding structures are investigated, with the cohesive zone model employed to equivalently simulate the adhesive layers with various thicknesses.
In the present research, the influence of the bondline thickness on the damage and stress evolution of metallic adhesive bonding structures are investigated, with the cohesive interface model employed to equivalently simulate the bondline with various thicknesses.
Unlike the procedures reported in the literature, no metallic inter-adhesive layers are needed for the formation of long-term stable dispersions of Janus-type functionalized ceramic particles.
These were then sandwiched within metallic adherends by adhesive bonding and tested in shear and tension to study their adhesion.
Results indicated plasticity-dominated wear (metallic particle oxidation, adhesive wear and mixed wear) as the sliding wear mechanisms.
Prior to the deposition of the V2O5 films, 10-nm Au layers were evaporated on the Si3N4 window to provide an adhesive metallic current collector between V2O5 and Si3N4.
This was attached to a metallic ring using adhesive and coupled magnetically to the DermaInspect®.
