Sentence examples for metal layers with from inspiring English sources
Our model shows that the waveguide losses increase both with increasing absorption layer thickness and with decreasing waveguide height, which is due to a larger influence of the metal layers with finite conductivity.
This technology will enable the development of integrated polymer sensors and electronics which are low-cost, robust and highly versatile due to the replacement of semiconductor, dielectric and possibly metal layers with polymers and minimal thermal budget.
Here we demonstrate the growth of transfer-free graphene on SiO2 insulator substrates from sputtered carbon and metal layers with rapid thermal processing in the same evacuation.
We have developed a related hard coating based on multilayered stacking of CrN and Cr metal layers with bilayer thickness down to 22 nm.
The bimetallic pseudomorphic overlayer surfaces are composed of five metal layers with Pt, Cu, or Fe in the first and Au in the other four underneath layers.
Using these nanopillars, we produced large area uniform nanoholes perforated in different metal layers with controlled thickness by lift-off process.
Future work will be devoted to study the influence of the electrolyte composition, surface state, and metallic materials on the catalytic behavior of the metal layer, with the important consequence on the adhesion of the metal layer at the silicon surface.
In the bimetallic Au-Cu-Au (100), the second metal layer closes to the bulk with 5.55% similar to the first metal layer (with 6.59%).
In the following step, a metal layer (with thickness < 1 µm) is deposited atop the thin SU-8 isolation layer and patterned with standard photolithographic process to define the contact pads as depicted in Fig. 19d.
A referenced continuous Au, Fe, or Pt, film was simultaneously deposited on a Si (100) wafer to measure the thickness of the metal layer with a Taylor-Hobson Talystep profilometer.
It is demonstrated clearly that Ag formed on the template constituted a metal layer with "crude" patterns, a sharp contrast to that formed when HCHO was used as a reducing agent.
