Sentence examples for mesa structure with from inspiring English sources

The samples were fabricated in the shape of a mesa structure, with a top circular aperture of 1 mm diameter.

(c) An SEM image of a squared GaAs mesa structure with a wrinkled In0.2Ga0.8As layer on top.

After this, the devices were fabricated in a circular mesa structure, with a top 1-mm2-diameter optical aperture.

Figure 24 shows the SEM image of consecutive etch shapes of mesa structure with triangular compensation structure.

Figure 24 Sequentially etched shape for a mesa structure with triangular shape compensating design in surfactant added 25 wt% TMAH [120].

The fabricated stack of layers was processed into a square-shaped mesa structure with a lateral side length of 6 μm by photolithography and wet chemical etching as shown in Figure 1a.

For stripe-like mesa structures with a width of about 6 μm and a length of several tens of micrometers, parallel channels can be realized (Figure 4b).

We aimed for the fabrication of square, circular, and stripe-shaped membranes as shown in Figure 4. Mesa structures with circular or stripe shapes lead to straight channel structures, but they also offer a bigger variety of channel types with different alignments.

To clearly distinguish the emission peaks from a single QD, we fabricated small mesa structures with size ranging from 200 to 700 nm and measured the μPL spectrum near 920 and 940 nm, where the density of QDs is relatively low.

The sample [see Additional file 1 was fabricated in the shape of a mesa-structure, with top circular aperture of 1 mm diameter.

Finally, the cylindrical mesa-structures with a diameter of 50μ m (S = 2.0 × 10−5cm2) and cruciform mesa-structures (S = 3 × 10−5cm2) (Figure2a) were made by dry etching after photolithography.