Sentence examples for melting speed from inspiring English sources

Based on this transient model, factors affecting the melting speed in reciprocating extruders are identified.

In arcing-wire GTAW process, the wire melting speed and weld penetration are decoupled.

Figure 2c shows the predicted LSC phase map of the NWs, which plots the volume fraction versus the pulling speed, obtained by in situ observation of the melting speed and melted fraction.

The result has shown that screw rotation speed, screw axial movement speed, barrel thickness, barrel heat capacity, temperature of heater and polymer are factors affecting the melting speed and the transient effects.

In terms of the snowmelt/deicing performance, the HEA-MFL mixture performed much better than the regular SBS mixture regards of the higher snow melting speed and lower mixture-ice bond strength.

All the specimens were fabricated on the EBM A2 machine using a melt speed of 180 mm/s and a beam current of 2 mA.

Such melting can speed the seaward movement of ice in the same way that removing a doorstop lets a door swing freely.

In the Carabaya range, they had receded by 32%.Partial surveys by geologists suggest that the rate at which the glaciers are melting has speeded up over the past decade.

The ice that defines it is melting with alarming speed, taking with it life that can survive nowhere else.

The residual stress of WC-10Co4Cr coatings is determined by the size, melting state, flight speed and temperature gradient of splats.

The 3 main parameters, such as injection speed, melting temperature, holding pressure, were investigated to study their effect on the physical appearance and compressive strength.