Sentence examples for melting point approximately from inspiring English sources
Indium/gallium eutectic metal (Ga (75%) In (25%) by weight; the melting point, approximately 15.5°C) was used to form an electrical contact on both sides.
These products exhibit the properties for which alumina is well known, including low electric conductivity, resistance to chemical attack, high strength, extreme hardness (9 on the Mohs hardness scale, the highest rating being 10), and high melting point (approximately 2,050 °C, or 3,700 °F).
In addition, TiO2 has a high melting point (approximately 2116 K) and will be thermally stable under high temperature (approximately 900 K) during the reset operation.
In this study, the foaming temperature is set at 140°C, which is slightly higher than the melting point (approximately 130°C) of HDPE beads.
Its melting point is approximately 110 °C (230 °F).
Its melting point is approximately 2,350° C (4,260° F).
The FSPCMs consist of paraffin with melting point of approximately 53 °C as a latent heat storage material and olefin block copolymer (OBC) as a supporting material.
The preparation of Phase Change Materials (PCM) with improved thermal conductivity, based on linear low-density polyethylene (LLDPE), paraffin wax with a melting point of approximately 42 °C and expanded graphite as well as the investigation of their physical behavior is reported in this paper.
The average temperature of the system remains above the melting point of GeSe3Ag (approximately 1150 K, [21]) for 11.9 ps.
Furthermore, the melting point of paraffin is approximately 55°C to 65°C, which makes it suitable for thermal storage in non-concentrating solar collectors.
The maximum temperature was changed from 1,050°C to 700°C (Since we exploited a high-vacuum furnace made of quartz for pyrolysis, the maximum temperature has to be limited up to 1,100°C. Besides, although the melting point of nickel is approximately 1,450°C at 1 atm., a very thin nickel thickness (up to 200 nm) is easily agglomerated in the vacuum atmosphere.
