Alloy Ti44Al6Nb1.0Cr2.0V0.15Y0.1B is newly designed and melted by vacuum consumable melting method, and is then prepared by cold crucible directional solidification (CCDS) technology.
A porous Ti6Al4V implant (TI) was prepared using the electron beam melting method, and some samples underwent surface modification with a hydroxyapatite coating (HA-TI) by plasma-spraying.
In addition, N-phenylmaleimide (MI) and p-phenyl-phenylcyanate (S-Cy) were utilized as model compounds and mixed via a melting method and a solution method to explore the corresponding cure reactions by means of FTIR, DSC and NMR.
In the present study, two Ti-based amorphous matrix composites containing ductile dendrites dispersed in an amorphous matrix were fabricated by a vacuum arc melting method, and deformation mechanisms related to the improvement of strength and ductility were investigated by focusing on how ductile dendrites affected the initiation and propagation of deformation bands, shear bands or twins.
The aromatic aliphatic polyamides, on the other hand are difficult to prepare by interfacial and solution methods [30, 41] and when prepared by melt methods, frequently are discolored and may have branched or network structures.
Probably the reason that aliphatic aromatic polyamides have been studied in greater detail than the aromatic aliphatic is that many of the former group can be made by melt and plasticized melt methods [32, 33, 39] or by standard interfacial procedures [35, 37, 40].
The crystallinity of CEL in MC was affected by different loading methods, which involve evaporation method and melting method.
Ni-Al intermetallic compounds synthesised by a vacuum melting method, designed with different composition and microstructure and corresponding to molar ratios of Ni: Al = 1 1, 2 1 and 3 1, respectively, were investigated.
Figures 1 and 2 showed that the urea melting method gave higher FT catalyst stability and C5+ selectivity.
Early by directional solidification method and the method of zone melting method prepared Bi2Te3 single crystal or columnar crystals; commercial production is also using these methods.
