Sentence examples for medium loading from inspiring English sources

Desorber rich end pinches were found for most of the runs at low and medium loading.

For high-pressure experiments specific sample-, ruby- and pressure transmitting medium loading procedures have to be applied as described in Ref. [14].

The fermentation medium loading volume ranged from 1.8 to 2.5 L, and equivalent volume of oleyl alcohol was added to ensure a 1 1 oil/broth volumetric ratio.

For lower to medium loading, ATBFQ provides higher throughput, lower queuing delay, and a lower number of packets dropped as compared to SB and RR.

The maximum transformation from AgNPs to Ag+ was 2.7% (27 µg L−1) in pH 8 medium (loading of 1 mg L−1) after 7 days.

Results also illustrated that nanocomposites with medium loading level (i.e. 2%) of nanoclay have the highest tensile strength, while the highest hardness number belongs to nanocomposites with 4 wt% nanoclay.

As a consequence, the compressive peak stress and the plastic failure strain at the beginning of post-buckling showed an anomaly with respect to strain rate indicated by minimum values under medium loading-rate conditions.

It consists of light load, medium load and heavy load.

At medium loads (≈40 nN) the measured friction for both contacts is approximately the same (Fig. 3c).

Thus, larger gains can be found at lower and medium load levels, where ANS SON has more freedom to operate.

The proposed design can be controlled with three modes of motion: synchronized motion (for small load), inchworm motion (for medium load), and rigid motion (for heavy load).