Sentence examples for medium inlet from inspiring English sources

The application of dynamic methods for determining the oxygen uptake rate (OUR) in continuous mammalian cell cultures frequently ignores contributions to the oxygen balance such as the oxygen content in the culture medium inlet and outlet and the oxygen transfer between the culture and the headspace through the culture surface.

1. Reactor (3 L), 2. Glass bottle (2 L), 3. Medium inlet, 4. Gas inlet, 5. Temperature probe, 6. Pressure meter, 7. Gas controller, 8.

The operating variable was the specific gravity of the medium, feed inlet pressure and feed inlet flow rate.

The experiments are conducted for low and medium fluid inlet temperatures between 50 °C and 150 °C for receiver inclination angles of 0 (side ways facing cavity), 30, 45, 60 and 90° (vertically downward facing receiver).

The thermophotovoltaic and thermoelectric applications should be feasible at medium to high inlet temperatures.

However, previously the only source of oxygen was that arriving dissolved in medium at the inlet.

The most widely favoured apparatus is the flow cell, constructed of polystyrene mounted with a microscope slide and connected by tubing to an inlet medium vessel and an outlet waste container (Wolfaardt et al. 1994).

Briefly, microchannels with two ports open to the air are filled with a pre-polymerized solution of collagen I. Surface tension-driven pumping (i.e. passive pumping) is used to flow a droplet of a culture medium from the inlet port to the outlet port [ 27].

The effect of pile type, medium flow rate and inlet temperature on thermal performance is separately discussed.

Both the upward flow and the downward flow become very strong in the DMC with a small inlet when medium feed rate is constant, which results in a very low Ep.

The numerical simulations show that the drill pipe rotation builds cuttings presented in non-symmetric distribution along the hole and significantly decreases the cutting volume concentration at the medium and high fluid inlet velocities and lower range of drill pipe speeds.