Sentence examples for mechanical twins increased from inspiring English sources

In particular, the volume fraction of the secondary mechanical twins increased rapidly with the addition of Si.

It is evident that the density of mechanical twins decreases with increasing of the depth from the top surface.

The activity of parallel twinning increased with increasing applied stress.

In addition, the critical strain for serration start on the tensile stress strain curves (i.e. required strain to generate mechanical twinning) was found to increase with increasing Cu content.

Transmission electron microscope (TEM) observations also indicated that the occurrence of mechanical twinning was suppressed by increasing the Cu addition.

The TWIP steel with 0.21% N exhibited the highest SHR at large strains, despite the reduced twinning and DSA, because of both the thinning of the mechanical twins and the hardening of the twin boundaries as the N concentration increased.

Increase in the thickness of nitrided layer can be attributed to the increase of crystalline defect density such as grain boundaries, mechanical twins, martensitic interfaces, and high-strained crystalline lattice, which are suitable paths for the rapid diffusion of nitrogen [8, 26, 27].

However, a Lexus spokeswoman, Allison Takahashi, said the two vehicles were not mechanical twins.

High densities of mechanical twins are identified in the surface layer of the sample.

In addition, formation of deformation bands identified as mechanical twins in such austenitic stainless steel [21] is observed in this figure.

However, the amount of the (0 1 1) compound twin increases with increasing annealing temperature due to its small twinning shear.