Sentence examples for mechanical resistance at from inspiring English sources
The films grown on TiN interlayer are harder, have higher elasticity modulus values and an increased mechanical resistance at the indenter penetration.
Moreover, the mechanical properties showed that the volume fraction of small precipitates (VC, Fe3Mo3C) directly influences the mechanical resistance at high temperature but has a detrimental effect on Charpy impact energy.
The humidification grade of Nafion membrane was indicated as the main factor affecting the proton conductivity of Nafion while the addition of the inert compound like YSZ, did not affectthe electrochemical properties of the membrane but, rather has enhanced mechanical resistance at high temperature.
From these results, it was concluded that highly porous metallic matrices can be obtained, with very high roughness factors and excellent mechanical resistance, yet at very high apparent current densities of electrodeposition (5 A cm−2).
The most important characteristics required for sintered friction materials are high and stable friction coefficient during breaking and also, for high durability in service, must have: low wear, high corrosion resistance, high thermal conductivity, mechanical resistance and thermal stability at elevated temperature.
This research emphasizes the development and characterization of high performance pervious concrete aiming at improved mechanical resistance and advanced durability properties.
Several theoretical and experimental studies have been carried out in recent years aimed at enhancing the mechanical resistance and osseo-integration of titanium based dental implants.
However, at several subplots, the mechanical resistance of the soil prevented excavations reaching this depth.
The mechanical resistance is carried out on clay structures fired at 500 °C, 850 °C and 1060 °C.
To further demonstrate that EGFR inhibition is at the basis of increased mechanical resistance, two independent EGFR siRNA were co-transfected with p63 siRNA.
To this end we have investigated the mechanical resistance displayed by two ices subjected to coring operations at low temperatures and under vacuum.
