Sentence examples for mechanical properties occurred from inspiring English sources

The higher the thermal aging and immersion temperatures, the more deterioration of the mechanical properties occurred.

The goal of this study was to use RPI to determine if raloxifene-induced alterations in mechanical properties occurred after 6 months of treatment.

The largest differences in the mechanical properties occurred in the systems with the lowest crosslinking density and diminished as the crosslink density of the cured polymer increased.

Based on the Raman spectroscopy results and mechanical testing data, 7% of ABS was believed to be the critical ABS content where significant changes in the materials' chemical composition and consequently in mechanical properties occurred.

After exposure to 120 °C and 200 °C for 4 h, negligible degradation on mechanical properties occurred in BFRP plates, while a reduction in the Weibull shape parameter (m) is found for the basalt fiber roving.

Under these equilibrium conditions of sorption, no evidence was found that sustained the concept that a break in mechanical properties occurred at about 1% sorption as a result of plasticization leading to clustering.

Substantial changes in articular cartilage composition and mechanical properties occur during the development of osteoarthritis (OA).

The most efficient dispersion of the ABS phase and the best combination of mechanical properties occur within an optimum range of the nylon/ABS viscosity ratio.

A change of mechanical properties occurs in the strain range of the strain-hardening threshold depending on whether the draw temperature is above or below a critical value of about 100°C.

Changes in the cartilage structure and composition, in morphologic and metabolic features, and in mechanical properties occur during the development and progression of osteoarthritis.

By depositing nominally similar DLC films on silicon samples positioned horizontally and vertically on the reactor cathode plate it was possible to examine the variations in the coating characteristics and mechanical properties that occur due to the geometry of the substrate being coated.