Sentence examples for mechanical processing with from inspiring English sources

1. Nanometer-scale groove and protuberance can be processed by mechanical processing with a sharp and conductive diamond tip without and with lateral vibration, respectively.

In the case of mechanical processing with vibration, the current of the processed areas was decreased, as shown along A-A' in Figure 4b.

The heights of the protuberances formed by electrical processing with vibration at a high voltage were higher than those by mechanical processing with vibration.Current distribution images of these electrically processed areas are shown in Figure 5b.

This paper presents an experimental and computational investigation on the influences of the secondary mechanical processing with different reductions on the porosity, microstructure and mechanical properties of compocast high strength and highly uniform Al matrix composites.

Figure 4 Dependence of surface properties on applied load during mechanical processing with 10 nm vibration.

In contrast, mechanical processing with vibration caused the surface to protuberate and the electrical resistance increased similar to that observed for electrical processing.

The electrical resistance of the surface can be changed by mechanical processing without and with vibration.Figure 6b shows the average difference of currents calculated from the mean current of each processed area minus the current of the unprocessed area.

In contrast, with additional mechanical processing, the depth of the electrically processed area became nearly 0.74 nm, thinner than that of the reacted SiO2.

At each chop length, corn was harvested with and without mechanical processing using a John Deere 5830 harvester with an onboard kernel processor.

In the second experiment, Pioneer hybrid Quanta was harvested at two theoretical lengths of cut: 27.8 and 39.7 mm, with and without mechanical processing.

Mechanical processing of decellularized tissues yielded particles with diameters ranging from 71 to 334 nm.