Sentence examples for mechanical mixing rate from inspiring English sources
The influence of the PMMA average molecular weight (MW), the kind of core material, and the mechanical mixing rate on the mechanical properties of the microcapsule shell were studied using the Taguchi experimental design approach.
Mixing frequency was then modelled based on the turbulence frequency and a model constant Cϕ, the ratio of scalar to mechanical mixing rates.
Mechanical mixing favoured the reaction rate.
The composite slurry was then reheated to a fully liquid state, automatic mechanical mixing was done for 30 min at a stirring rate of 220 rpm and casting was done in a steel mould.
After sufficient manual mixing, the composite slurry was reheated to fully liquid state (up to 760°C ± 10°C), and then automatic mechanical mixing was carried out for about 10 min at a normal stirring rate of 600 rpm.
Then, the composite slurry was reheated to a fully liquid state, i.e. up to a temperature of 730°C ± 10°C, and then automatic mechanical mixing was carried out for about 20 min at an average stirring rate of 300 rpm.
In many experimental biosorption systems, the influence of transport in the solution is rejected by fast mechanical mixing, so it is not supposed to be involved in governing of the overall sorption rate and can be overlooked, as a rule (Plazinski et al. 2009).
The advantages of UASB reactor are independence from mechanical mixing, recycling of sludge biomass and ability to cope up with perturbances caused by the high loading rate.
Mechanical mixing of extra SiO2 with 3% Ag loaded SiO2 resulted a further increase of soot oxidation rate, probably due to the increased interactions of O2− and soot particles through the highly porous surface of SiO2.
The mechanical mixing of Ni with neat AB has resulted in considerable reduction in the induction time and improvement in hydrogen release rate.
The most elaborate mechanical mixing devices that have been built so far require a millisecond to initiate a solution reaction.
