Sentence examples for mechanical interlocking of from inspiring English sources
The first is mechanical interlocking of polymer and nanoparticle debris within the counterface asperities, thus leading to deposition of transfer film and a smoothening of the wear surface.
However, it seemed to be most applicable only to the stem designs in which mechanical interlocking of the stem in the initial fixed position was essential.
Reinforcement factor (Rf) has also confirmed this strong mechanical interlocking of diamond with the matrix which was ~ 1.7 and ~ 3.0 times higher than CNT and graphene, respectively.
The detachment of particles from single component F-HA deposits did not occur during EPD due to the mechanical interlocking of F-HA particles in their microstructure.
The improved mechanical interlocking of molten splats during re-solidification of five discrete layers of ceramic composites inhibits the concentration of stress around the weak links.
The system exhibited a ductile failure mode which can be attributed to the high specific surface area and the desired mechanical interlocking of the chicken mesh reinforcement.
In this paper, an experimental study is performed in which the effect of adhesive properties, bar type, bar size, FRP properties, groove geometry and the use of mechanical interlocking on the capacity and bond behavior of a NSM joint is investigated.
Fig. 9 Schematic diagram of initial mechanical interlocking on Al2O3 substrates and the growth of Cu films by the AD process.
The host site and allograft require meticulous preparation to maximize surface contact and mechanical interlock of the allograft and host.
Some alternative connectors account for the contribution of the mechanical interlock of the concrete in holes or other indentations drilled in steel plates welded to the beam flange.
Therefore, the major contributing factors to the bond formed during this densification may be the mechanical interlock of the fibres of the biomass and adhesive force between the particles.
