Sentence examples for mechanical characterizations were from inspiring English sources
PLCL and PLC L/Collnanofibrous scaffolds were fabricated by electrospinning process and their chemical and mechanical characterizations were carried out using SEM, contact angle, FTIR, and tensile instrument.
Their morphological, chemical and mechanical characterizations were carried out using scanning electron microscopy (SEM), attenuated total reflectance Fourier transform infrared (ATR-FTIR), and tensile instrument, respectively.
Mechanical characterizations were carried-out on control and exposed CFRP strengthened concrete specimens, in order to assess the evolutions of the adhesive bond properties during hydrothermal ageing.
Then, physical and mechanical characterizations were carried out on carbon fabric/repair resin composite laminates (materials A, B and C) before and after ageing and results are presented.
A series of compressive mechanical characterizations was performed on the parametric scaffold design and an empirical formula was presented to predict the compressive stiffness of the scaffold as a function of total porosity.
Microstructural and micro-mechanical characterizations were performed using electron back-scatter, synchrotron x-ray and in-situ neutron diffraction techniques.
Microstructural and tribo-mechanical characterizations were performed on Ti6Al4V samples obtained by selective laser melting and subjected to different surface treatments (thermal stress relief, acid etching, chemical treatment and thermo-chemical treatment).
The electro-mechanical characterizations were performed at room temperature with an apparatus composed by a Keithley 2635A sourcemeter (Keithley Instruments Inc., Cleveland, OH, USA) connected to a homemade sample holder and coupled with a universal mechanical testing machine (MTS QTest/10, Eden Prairie, MN, USA) with a load cell of 500 N, as shown in Figure 1.
The mechanical characterization was performed on a mechanical analyser (ZWICK ZO 20/TN2S, Germany).
Mechanical characterization was measured by uniaxial compression, indentation and dynamic mechanical analysis assay.
Mechanical characterization is vital for the design of micro-/nano-electro-mechanical system (MEMS/NEMS).
