Sentence examples for mechanical characteristics obtained from inspiring English sources

Table 3 Mechanical characteristics obtained in the exposed and protected parts of the wall.

Based on mechanical characteristics obtained during three-point flexural test, the load (F) and stress (M) at the point of maximal load which causes cracking, and deflection (l) and strain of the sample to this point were determined.

Mechanical characteristics were obtained through compressive strength and splitting tensile strength tests with standard cylindrical specimens of 150 × 300 mm, and flexural strength and flexural toughness tests were performed by using beams of 100 × 140 × 1200 mm.

A fairly good agreement has been found between the strain energy characteristics obtained from mechanical loading data and independently measured acoustic emission signal being distinguished in terms of consumed and released energy.

The stability and mechanical characteristics of collagen obtained in these experiments indicate the hierarchical assembly occurs at both a structural and mechanical level.

This favours the conclusion that – without discussing the ascertained ability of ancient foundry-men - they had also already discovered the convenience of recycling broken objects thus producing a more or less similar bronze alloy each time, depending on materials' availability; necessary mechanical characteristics could then be obtained by post processing.

The principal mechanical characteristics of construction steels are obtained by tensile testing.

Biaxial tensile loading tests were conducted to obtain the mechanical characteristics of competitive swimwear.

For the material modeling, the uniaxial cyclic tensile loading tests were conducted to obtain the mechanical characteristics of competitive swimsuits.

In addition, for the sake of obtaining steady mechanical characteristics and preventing interference from environmental fluctuation factor, each test was performed when the thermal drift dropped down to 0.01 nm/s.

Mechanical characteristics of cells were determined by obtaining the calibration force curve on the glass first in order to calculate the coefficient, which converts cantilever deflection expressed in units of current into units of distance-a (m/A).