Sentence examples for measuring the static from inspiring English sources
Furthermore, the flow was studied by measuring the static pressure distributions on both lateral supraglottal channel walls.
After measuring the static contact angles and roll angles, the dynamic characteristics of droplets impacting on these hydrophobic/superhydrophobic surfaces were investigated in detail.
This paper describes the test apparatus and the methodology for measuring the static characteristics of the air brake valves for agricultural trailers.
This experimental study quantified the tool part interaction by measuring the static and dynamic frictional coefficients as a function of process time, using a friction test fixture specially designed to simulate the autoclave environment.
Then, the effectiveness and accuracy of the established system were verified by measuring the static deformation of a stationary carbon fiber reinforced polymer (CFRP) panel and transient deformation of an aluminum panel under the impact of a cylindrical foam projectile.
The effects of deformation on the hydrogen absorption/desorption behavior of a B2 single-phase Ti 22Al 27Nb (at.%) alloy were investigated mainly by measuring the static pressure composition (P C) isotherms from room temperature to 100°C for specimens quenched from 1200°C and deformed to 5 ∼90% in compression or by cold-rolling.
This study measured the static and dynamic accuracy of the new tracking technology in a clinical radiation therapy environment.
We measured the static pressures on the ground with accurate pressure transducers of the absolute pressure type and investigated the characteristics of the static pressure on the ground.
The new system consists of a radar sensor apt to simultaneously measure the (static or dynamic) displacement of several points of a structure with high sensitivity.
Despite of need for further verification, this finding is encouraging because it may be acceptable to measure the static strength first and use the SMM predictions to estimate the life of the structures.
A measurement technique based on the motion video image capture and processing (MVIP) is developed to measure the static and dynamic deflections of the microcantilever subjected to forces due to fluid within the microchannel.
