Sentence examples for measuring the samples from inspiring English sources

Interference from the spectra of solvent can be avoided by measuring the samples in gas phase, thereby extending the application range of DAOSD and relevant approaches.

Before measuring, the samples are degassed at 60 °C.

This method consists of measuring the samples mass loss, surface S during the immersion in a corrosive solution.

Water and hydrochloric acid were added to 750 μL of each fraction to a total volume of 2 mL and a HCl concentration of 1.5%, before measuring the samples on the inductively coupled plasma-mass spectrometry system.

This additionally provides a great advantage of measuring the samples over longer periods of time [ 38], when images of large pixel number are to be acquired.

Additionally, the use of the 96-well plate resulted in lower spectral intensities compared to measuring the samples individually in glass vials.

Technical replicates were performed by measuring the sample three independent times.

The estimated systematic error in determining M is ~10% due to inaccuracy of measuring the sample mass that was typically several mg (this is difficult because of the extreme sensitivity of intercalated GLs to moisture and oxygen).

Furthermore, the method does not require measuring the sample mass.

The time between the cleaning and measuring the sample with XPS was about 30 min.

We followed the degradation by measuring the sample mass that remained after each hydrolysis period.