Sentence examples for measuring bandwidth from inspiring English sources
Second, it presents a method for measuring bandwidth usage; the dialogue trees used for this computation are a new and compact representation of the probability distribution of every possible dialogue between two agents.
However, measuring bandwidth of a single node in these environments can yield disparaging results.
For current conversion, we use Rogowski coils from Fluke [22], that allow a −3 dB measuring bandwidth from 10 Hz to 10 kHz.
After measuring bandwidth for the first node and its link delay, the second node must compare the bandwidth of both nodes and pick the minimum bandwidth, while the delay on the second link is summed with the delay on the first link, and this operation is repeated at each node.
Supplementary experiments indicated that the measured bandwidth dependencies were not contaminated by the extraneous sounds produced by the scanner.
The designed microstrip slotted antenna has a 300 MHz of measured bandwidth and 5.7 dBi of measured gain, which is sufficient to cover the ITS band (5.85 5.925 GHz).
The proposed antennas are fabricated and measured bandwidth for Koch-Minkowski slot is 3326 MHz and for the Koch-Koch slot is 3237 MHz.
The peak measured bandwidth for our system is 101.4 MBytes/s and the one-way latency for short messages is 18.2 μs.
When packet loss rate was less than 0.1%, the measured bandwidth approached the correct one.
The measured bandwidth during upload is close to the maximum data rate, the used internet service provider offers for upstream.
Before we present the experimental results of the measured bandwidths in our soft-core controlled system, we would like to address why experiments are necessary in the first place.
