In the Caucasians we studied, the torque on the lower molars and lateral incisors was comparable to Andrews' measurements, while the torque we measured at the two premolars was less negative.
The overall average 12 V/m and SD 35% are based on all 810 individual measurements, while the highest individual measured value was 29 V/m and lowest 3.4 V/m.
Finite element models are in good agreement with the experimental measurements while the analytical models over-predict the measured strength due to a neglect of manufacturing imperfections.
Chemical and mechanical properties of PCL/gelatin nanofibrous scaffolds were measured by FTIR, porometry, contact angle and tensile measurements, while the in vitro biodegradability of the different nanofibrous scaffolds were evaluated too.
In the experiment, the system is calibrated by taking RSS measurements while the network is vacant from moving targets.
In contrast, acoustic localization method does not accumulate errors of measurements, while the estimation results of this method sometimes diverge.
IEQ conditions were determined with spot and continuous measurements, while the building occupants' satisfaction with environmental attributes was surveyed simultaneously.
First of all, IRAS samples used for similar studies were based on 60-μm measurements, while the AKARI survey is based on the 90-μm band.
Generally speaking, the indirect methods are more suitable for low number of randomly distributed measurements, while the direct methods outperform the indirect ones at higher number of measurements.
On the other hand, MC requires a fixed processing time independently of the number of available measurements, while the effect of the number of sources is minimal.
The static wettability of samples was assessed by contact angle measurements, while the dynamic wettability was analyzed by high speed camera system.
