Sentence examples for measurements were set from inspiring English sources

For each image, the whole field was selected using the rectangle tool and measurements were set to take integrated density, area measured, and mean gray value (integrated density over area measured).

Essential diagnostic tools for 3D cephalometry with modified definitions of the points, planes, and measurements were set up based on a review of the conceptual differences between two and three dimensions.

Emissivity for all the measurements were set at 0.96 (Jones 2004).

The deposition potential (Edep) and time (tdep) for each measurements were set to −6.0 V and 15 s, respectively.

After adjustment of temperature, measurements were set at a rate of 15 °C/min and then the rate gradually decreased to 5 and 2 °C/min.

The measurements were set as an oscillation model and frequency experiments were first performed in the range of 1 15 Hz to establish the extent of the linear viscoelastic region.

Specific applications of the laser vibrometer theory to radial and axial vibration measurements are set out and it is shown how estimation of radial vibration components is only possible by post-processing.

The energy/angular resolution in ARPES measurements was set to be at 80 meV/0.2°.

The time duration for all the measurements was set to 1 min.

The new measurements are set to be recorded over a period of ten days, and will possibly begin as early as next week.

The bandwidth of both KPFM measurements was set to 100 Hz (narrower than that of the NC-AFM measurement).