To verify that the sag is related to HCN currents, CsCl at 1 mM was applied after the measurement was concluded, and the voltage sag vanished completely as a result.
From the results of the measurements it is concluded that the performance of the impedance gauge is good under the prevailing experimental conditions.
Based on these tests and measurements, it is concluded that the self-excited fuel assembly vibration is the primary root cause, while excessive initial spring force loss during the fuel rod loading process is the second major root cause.
Based on the data of the activation energy for crystallization of the amorphous phase, Ex, and the crystallization temperature, Tx, together with magnetic measurements, it is concluded that the as-cast Sm60Fe10Al10Co15Cu5 cylinder displays a tendency for clustering.
From temperature dependent conductivity measurements it was concluded that above the glass transition temperature the ionic conductivity of the sodium salt systems follows an Arrhenius behaviour, while the lithium and potassium salt systems follow a Vogel-Tammann-Fulcher behaviour.
Through comparisons with the experimental measurements it is concluded that the design rules which allow for an extreme wave encounter provide a reasonable safety margin for the global loads in abnormal waves, although discrepancies occur towards the aft of the vessel.
It was shown that more accurate pH measurement can be concluded with the proposed ASIC and VT extractor circuitry.
From zeta potential measurement, it was concluded that charge neutralization is the main mechanism of coagulation at slightly acid pH, and c-PAM is very effective in the bridge effect.
The EPAQ-2 has been validated against four-day heart rate measurement and was concluded to have the validity and repeatability/reliability to be used in a large-scale epidemiological study [ 36].
The predicted response is compared to the measurements, and it is concluded that the predicted horizontal response is closer to the measured response values if the co-spectral density of the turbulence components are included.
