Sentence examples for measurement were set from inspiring English sources
The Edep and tdep for each measurement were set to −6 V and 15 s, respectively.
The effect of the GW distribution was tested in the wet and dry period separately, 20 sampling points for moisture measurement were set in the horizontal plane at the depth of 15 cm under the soil surface in each tank.
The micro-indenter system was tested on an aluminum bar, and the units of measurement were set to be hard Vickers pyramid number (HV) meant for metals in the Vickers scale.
The new measurement is set to return it to the OS official height before the 1980s.
The interval between each measurement was set to one hour, starting at 1 am.
In the low-temperature measurements, the maximum field in the hysteresis loop measurement was set to be 3 T.
The frame rate during measurement was set at 30 fps. Figure 12 shows the object transport flow using the outrigger.
For this reason, the time resolution of the LEPe measurement was set to 8 s ((N(T =1)).
An experimental system for 3D multi-vision measurement is set up with two sets of vision sensor and its calibration matrix is obtained.
As explained earlier, the out-of-plane resolution of the measurement was set by the visible region depth, zv approximately 310 ± 50 nm.
The value of n in this measurement is set to 10 s.The measurement results in Figure 8 show a monotonic relation between the throughput and the interference transmission rate.
