Sentence examples for measurement of the initial from inspiring English sources

The main source of error was caused by the uncertainty in the measurement of the initial BP thickness.

After measurement of the initial permeability, the coal was removed from the core holder and the face of the coal cube that was at the downstream side of the core holder was dipped in the PES/NMP solution.

Integral to the collection of samples is the accurate measurement of the initial pressure and temperature of the reservoir because experiments are all conducted in a laboratory at an assumed constant temperature.

It was found that the simple measurement of the initial current could provide an effective alternative to the charge passed (total coulombs) and these two measured electrical properties were significantly correlated with each other under different conditions.

This estimate involves measurement of the initial decay rates of the room and is, unlike the usual reverberation room sound power estimate, neither based on statistical diffuse field considerations nor on the normal mode theory.

In particular, effects due to the distortion of the entrance field by a large area window have been eliminated in a simple fashion, to allow measurement of the initial rate of energy loss and to provide an energy- and species-independent cathode signal.

The paper also presents the findings of the measurements of the initial geometric imperfections of a real reticulated shell structure.

Measurements of the initial rate of uptake of SO2 were made for small batches of CaO injected into silica and fluidised by, for example, N2 + SO2 + O2.

Reliable model boundary conditions were established from detailed measurements of the air jet injection velocities and detailed measurements of the initial spray using the Spatially-resolved Spray Scanning System (4 S).

This provided a means for the rapid (less than 1 min) and sensitive (detection limit 0.5 nM) detection of Aflatoxin M1 based on measurements of the initial rate of hybridization.

Monitoring included overcore stress measurements of the initial stress within the rock mass, changes in cable bolt loading, standing support pressure, roof deformation, rib deformation, stress changes in the coal pillar, and changes in the full three-dimensional stress tensor within the rock mass at six locations around the monitoring site.