Sentence examples for measurement amplifier from inspiring English sources
The designed equipment is a portable, handheld box with all the required sensors, data processing and display which can do the job without auxiliary equipment like PC, measurement amplifier or DAQ devices.
The strain gauge measurement amplifier had a LiPo-battery, four ports, and wireless transmission.
The analogue output of the measurement amplifier was connected to a 16-bit DAQ-System (NI USB-6251 BNC, National Instruments, Austin, Texas, USA) and sampled at a rate of 1,000 Hz.
The small s-shaped force sensors were oriented parallel to the bone and connected with a measurement amplifier via an associated board (GSV-4BT, Me-Meßsysteme GmbH, Hennigsdorf, Germany).
During measurements, the measurement amplifier and the LiPo-battery were fixed to the board of the force sensors and attached to a backpack to avoid adding an additional load to the leg.
Since higher pressures are reached on the brake pedal its nominal load was set to 2000 N. Signal output of the force transducers was connected to a measurement amplifier (EMA 3 DMS, MEGATRON Elektronik GmbH & Co. KG) and then sent to the MEphisto Scope (Meilhaus Electronic GmbH).
The peak tensile strength (N) and tendon dislocation at the insertion site (mm) were evaluated by measurement amplifiers [ x: distance (mm); y: force (N)] and the existing software (testXpert® 12, Zwick-Roell).
All acoustic stimuli were diffused with a sound pressure level of 75±± 1 dB at a distance of 1 m (RMS measurement, Brüel und Kjær Measuring Amplifier Type 2610).
Stimuli were filtered in BatSound Pro 3.31 (low pass: 80 kHz, high pass 5 kHz), prepared in Signal 4.0., and played at 75 ±1 dB at a distance of 80 cm (RMS measurement, Brüel und Kjær Measuring Amplifier Type 2610) while the lemur licked juice from a bottle in a sound-attenuated chamber.
Figure 6 AltCPR measurements versus amplifier output power.
The labels "ACE" or "no ACE" refer to the case where the ACE method is applied or not; the labels "DPD" or "no DPD" refer to the case where the DPD method is applied or not. Figure 5 ACPR measurements versus amplifier output power.
