Sentence examples for measured using heat from inspiring English sources

Transpiration of Douglas-fir and red alder was measured using heat dissipation sensors installed in eight trees per plot and scaled to the plot level based on sapwood basal area for each species.

The apparent thermal conductivity of the samples of aerogel blanket were measured using heat flow meter (HFM) at mean temperature ranging from −20 °C to 80 °C and the results polished thorough two-thickness method to de-convolute the effect of thermal contact resistance (TCR), between the sample and HFM hot and cold plates, from the apparent thermal conductivity values.

The illumination did not cause a measurable change in temperature in the FH of the arena compared to the BH, as measured using heat probes.

The heat capacities were measured using the heat pulse method, measuring the response of the calorimeter to a heat pulse, which is evaluated as a function of time [32].

The low temperature (2 to 300) K heat capacity of monoclinic hafnia (HfO2) was measured using the heat capacity option of a Quantum Design Physical Property Measurement System (PPMS).

The low temperature heat capacity of compound 1 and 2 were measured using the heat capacity option of a Quantum Design Physical Property Measurement System (PPMS) in the temperature range between (1.9 300) K.

The low temperature heat capacity of the compound over the temperature range (2 to 300) K has been measured using the heat capacity option of a Quantum Design Physical Property Measurement System PPMSS).

Laminar burning velocities with and without O3 were directly measured using the Heat Flux method.

The ELTE mechanism developed using an optimization approach shows a very good performance in predicting laminar burning velocities of hydrogen flames measured using the heat flux method.

The adiabatic laminar burning velocities of THF air mixtures were measured using the heat flux burner method at atmospheric pressure (initial temperatures from 298 to 398 K, at equivalence ratios from 0.55 to 1.60).

Laminar burning velocities for nitromethane + O2 + CO2 were measured using the heat flux method for ϕ = 0.8 1.3 at 348 K and ϕ = 0.8 1.6 at 358 K, and an oxidizer composition of 35% O2 and 65% CO2.