Sentence examples for measured temperature increase from inspiring English sources

The measured temperature increase is in good agreement with a finite element model and a simple analytical thermal model.

During different test campaigns the measured temperature increase due to AC losses turned out to be higher than expected, which motivates the present study.

Reflecting the measured temperature increase between the periods 1961to 1990 and 1991 to 2009 (Figure 1), 31 of the examined 35 phenological phases advanced towards the beginning of the year as illustrated in Figure 2 for the ten indicator phases.

For the requested accuracy of temperature meters of 0.75 °C, relative uncertainties in heat energy are in the range of 16% in case of high measured temperature increases, i.e. increases in the range of 500 °C.

Changes of the absolute value and phase of the OCT signal were correlated with the optoacoustically measured temperature increases and the visual appearance of the lesions.

There were 101 experiments in four time course arrays measuring temperature increase, pH drop, salt increase, and phosphate starvation (Table  1).

In addition, we measured temperature distributions and found that temperatures increase continuously with increasing partial premixing.

According to the activation energy values measured, a temperature increase of 10°C will raise the oxidation rate by a factor between 1.4-1.6 1.4-1.6

We also measured the temperature increase by frictional heating in this simulated fault zone with a K-type thermocouple that was placed on a surface between the gouge zone and host rock on the stationary side.

For example, it was shown that milling in a mixer ball mill (MBM) for 10 min with two milling balls in a 10 ml beaker raised the temperature from 25 to 30 °C, and Colacino and co-workers measured a temperature increase of approximately 14 K after 30 min milling in an MM200 mixer mill [6, 11].

The power factor of AZO thin films with Al content of 3 wt% increased with increase of measuring temperature and the maximum power factor of 1.54 × 10−4 W m−1K−2 was obtained at 550 K with the maximum absolute values of Seebeck coefficient of 99 μV/K, which is promising for high temperature thermoelectric application.