Sentence examples for measured roughness from inspiring English sources

Under the conditions of the present study, the Ortho-Strips seems to significantly increase four of five measured roughness parameters.

The measured roughness values of perovskite films are also listed Run # Concentration of PbCl2 (mg/ml) Annealing temp.

The simulations were compared against experimentally measured roughness and residual stresses at full coverage.

Bacterial adhesion to implant surfaces is significantly correlated to the measured roughness parameters.

The initial surface was found to be totally flat, devoid of defects, and with a measured roughness lower than 1 nm.

Also, the European interim model (RMR) for railway noise predictions (2002) provides a method to correct measured noise emission by using the difference between the reference roughness and the measured roughness.

A ground surface roughness measurement method is proposed to address current problems in the use of machine vision technology to measure roughness: the calculations are complex, and the measurement process is largely affected by the light source.

The measuring roughness of the freeform surface after polishing is demonstrated in Figure 21. Figure 21 Roughness of polished surface.

This study considered the initial conditions when measuring roughness of the cutting tools' surfaces.

Membrane surface was achieved by measuring roughness parameters e.g. the average roughness (Ra) and root mean square roughness (Rrms), values of which were given in Table 1.

Minimum replication is used when measuring roughness in order to identify its quantities where cutting starts and stops.