Sentence examples for measured insertion loss from inspiring English sources

The measured Insertion Loss is higher than 20 dB above 500 Hz.

Measured insertion loss of the packaged CPW line was −0.11 dB at 2 GHz.

Excellent agreement is observed between the predicted and measured insertion loss.

Measured insertion loss was achieved higher than −33.9 dB and crosstalk level between elements less than −30 dB.

The fabricated length of the transmission line is 4.6 mm and the measured insertion loss and isolation are 9.13 dB and 24.37 dB at 70 GHz, respectively.

Experimental validation is conducted with a loudspeaker to simulate the dipole source, and good agreement between the predicted and measured insertion loss (IL) is achieved.

Measured insertion losses for sound pressure match well with those based on computed results although further study is needed in relation to some discrepancies shown in the results.

Measured insertion losses due to the ground effects associated with low configurations of loosely stacked household bricks on a car park are reported.

Across the bandwidth, the measured minimum insertion loss is about 1.7 dB, while the measured return loss is better than 19dBB.

In addition, the measured maximum insertion loss and return loss in the passband, from DC to 2.04 GHz (93% of the passband region) are 0.2 dB and 17 dB, respectively.

We also measured the insertion losses of the Ag tracks with a design for the high frequency transmission, and the observed electrical behaviors were discussed with the physical properties of the pastes measured in this study.