Sentence examples for measured hardness values from inspiring English sources

The measured hardness values were compared with conventional nanoindentation hardness measurement by CSM™ nanohardness tester.

The measured hardness values were in excess of 20 GPa.

The measured hardness values were about 8 GPa, and showed no dependence on the bilayer period.

Measured hardness values, averaged over 10 15 locations for each film, ranged from 16 24 GPa.

The measured hardness values are correlated with the grain size and compositions of the coatings.

It is demonstrated that the measured hardness values can be directly correlated to local microstructural and topographical features.

Nanoindentation measurements were performed with loads from 50 to 300 mN and measured hardness and elastic modulus values were about 105 and 1147 GPa, respectively.

The level of agreement between the subjective rating of ground hardness and the objectively measured hardness is presented in Figure 2. Figure 1 Box-and-whisker plot representing the hardness values for the four categories of subjective rating.

Tensi has shown that the measured values indicate congruent curves for calculated hardness sample quenched in the distilled water and the total wetting time measured at the top of the sample was more than 60 s, whereas the measured hardness profile shows a continuous line in the case of sample quenched in the polymer solution having total wetting time of 1.5 s (Figure 5) [2].

Other methods of measuring hardness, like those proposed by Brinell, Vickers and Knoop, allow representing hardness on ratio scales.

Experimental verification under a broad range of conditions shows a good agreement between the measured and predicted hardness values.