Your English writing platform
Discover LudwigSuggestions(5)
Exact(6)
Excellent agreement was achieved between melcor predictions and the measured data, when several empirically derived coefficients were used.
Using this method, we can estimate the energy resolution of the incidence light and the interface roughness from the measured reflectance, and also obtain the good fit to the measured data when the energy resolution and roughness are known.
A surface profiler also plays a crucial role because figure correction is performed on the basis of measured data when the target accuracy is higher than 100 nm (p-v) [4].
Table 1 shows the relative difference in drain current values in terms of the average root mean square (RMS) errors (absolute and normalized) between the simulated and measured data when the glucose is varied from 2 to 50 mM.
The full line shows that there is excellent agreement between the calculated and measured data when a value of r(OH−(IV)) = 1.365 Å is used in the calculation.
Although the fit was not perfect and there were two parameter sets required to reproduce all the data with the model that assumed localized diffusion restrictions, no sets were found that reproduced the measured data when the uniform diffusion restriction was assumed.
Similar(54)
Results tend to show that the theory reasonably explains the measured data except when unsteady or viscous terms become predominant.
Non-random sites pose particularly difficult problems because formal kinetic equations might still fit measured data even when the nucleation sites are non-random, as will be demonstrated in this study.
In current channel models, the ASA and ASD are calculated with Equation 6 from measured data, and when we use the channel model to generate ϕ n, the center of the Gaussian or Laplacian distribution is assumed to be the LoS direction, which is in contradiction with our observation.
In addition, in order to validate the model, the measured data was used when COD was 200 mg/L.
These measured data were obtained when the SSD temperature was 34 °C, which is rather high compared to that expected in the orbit.
More suggestions(3)
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com