Sentence examples for mean velocity at from inspiring English sources
This is for air - if you deal with hydrogen like we do, we have to multiply the result with 3.75 to account for hydrogen having another mean velocity at room temperature.
The placement of openings in relation to one another may enhance or reduce mean velocity at certain locations inside the room.
The study presents the hydraulic geometry relations of bankfull discharge, channel width, mean depth, cross-sectional area, longitudinal slope, unit stream power, and mean velocity at bankfull discharge as a function of drainage area using simple linear regression.
The shear parameter β, which is based on the velocity gradient, cylinder diameter and upstream mean velocity at the center plane of the cylinder, varies from 0 to 0.27.
The flow velocity fluctuations were created by an acoustic perturbation with a frequency between 20 and 1000 Hz and a perturbation intensity, defined as the ratio of the rms amplitude of the flow velocity fluctuations to the mean velocity at the exit of the burner, ranging from 0 to 150%.
Among the porous fences used in this study, the porous fence with porosity ε=20% shows the maximum reduction of mean streamwise velocity, but it has the highest vertical mean velocity at about x/H=1 location and large turbulence intensity in the near wake region.
Averaging data sets at each phase allowed an estimation of mean velocities at that phase.
The dynamic simulations carried out and the results obtained in the time domain show that traffic safety rates exceed the allowed limits for turbulent winds with mean velocities at the deck higher than 25 m/s.
Winds on the polar plateau are usually light, with monthly mean velocities at the South Pole ranging from about 9 miles per hour (4 metres per second) in December summerr) to 17 miles per hour (8 metres per second) in June and July winterr).
The reduced mean velocities at different heights and the contour of mean velocities are shown in Fig. 3.
The uncertainty in the mean velocities at 95%% confidence level was determined to be ±2 % (Manwell et al. 2010).
