The mean value obtained for C was employed to determine the fatigue resistance (Kf factor) allowing the life prediction of samples with different sized notches.
At near-physiological temperature, the maximal sustained outward current density was almost three times the mean value obtained at room temperature for Kv11.1a/1b, and increased by ∼150% for Kv11.3.
The results of tests and mean value obtained on two different methods showed that the fuzzy controlling with having least standard deviation, variance and error, is better than digital controlling.
The mean value obtained from heart tissue was set as 1.
The fluorescence intensities, in units of counts/pixel, were the mean value obtained from nine images taken with the EMCCD camera.
Points represent the mean value obtained from ten reaction runs, and the error bars are defined by the range of these measurements.
In case of MDCT test, the result represents the mean value obtained for the different heights W and relative notch depths α considered in this work.
The contour roughness of a character is defined as the mean value obtained from subtracting the maximum and minimum pixel values on a contour segment of fixed length.
Although, the mean value obtained was below the standard guidelines of 0.01 mg/L set by both DWAF [38] and WHO [39] for domestic water use, except sample B6 that exceeded the limits.
The mean value obtained for the vehicle treatment at 30 min was arbitrarily set at 100%.
The mean value obtained for 5 different cDNA samples was +1.63 ΔΔCT for the CCND1 assay.
