Sentence examples for mean roughness factor from inspiring English sources

For electrodes fabricated with 500 deposition cycles in the PtCu-electrolyte a mean roughness factor of 3070 ± 300 is observed, which to our best knowledge is higher than elsewhere reported for electrodeposited platinum electrodes.

Principle dimensions, geometric mean diameter, sphericity, roughness factor of fig kernels and bulk density increased with an increase in moisture content, whereas kernel density and porosity decreased with an increase in fig moisture content.

Electric double layer properties of variously treated Bi, Sb and Cd electrodes were studied in terms of the Debye length dependent roughness theory, recently developed by Daikhin et al. The geometrical roughness factor, root mean square departure of the surface from flatness, height of surface roughness and the medium lateral correlation length values have been obtained.

This saturation can clearly be seen from values listed for average increase in roughness factor per deposition cycle.

We conclude that the arithmetic mean roughness parameter is suitable for relating bare laminate surface roughness to final paint quality with roughness thresholds being developed.

Individual effect on surface roughness values in terms of arithmetical mean roughness (Ra) was studied by applying ANOVA.

The roughness factor was measured by krypton adsorption.

The surface roughness factor was deduced from impedance measurements.

The CoOOH had a roughness factor of 9.4, and the Co3O4 had a roughness factor of 63.6.

The effects of surface roughness on wettability have been studied by many researchers using surface roughness factors such as the Wenzel roughness factor and so on.

As we can see, for a hydrophilic surface with extremely high roughness factor