Sentence examples for mean roughness depth from inspiring English sources

Our findings also indicate a close relationship between the minimum uncut chip thickness and the mean roughness depth (Rz) of the machined surface.

The best roughness parameters for identifying the crack propagation mode are average roughness, mean roughness depth and mean height profile peak (Ra, Rz and Rpm).

Abbott Firestone curve based functional parameters (Rk, Rpk, Rvk, Mr1 and Mr2) coupled with mean roughness depth (Rz, DIN/ISO) and honing angle were measured and identified as the surface quality performance targets to be achieved.

Surface roughness is characterized by parameters including the root-mean-square roughness, the maximum roughness depth, and the mean spacing of the local peaks of the profile [20].

The specifications for the implants in this study were according to the manufacturer: 50-micron thick HA coating (Ca/P ratio: 1.67), a mean surface roughness of 41 microns, a maximum roughness depth of 445 microns, and 62% crystallinity.

The specifications for the implants in this study were, according to the -manufacturer, a mean surface roughness of 41 µ and a maximum roughness depth of 445 µ.

Rz is the roughness depth, calculated as the sum of the height of the highest profile peak from the mean line and the depth of the deepest profile valley from the mean line.

We conclude that the arithmetic mean roughness parameter is suitable for relating bare laminate surface roughness to final paint quality with roughness thresholds being developed.

Individual effect on surface roughness values in terms of arithmetical mean roughness (Ra) was studied by applying ANOVA.

The sand roughness considers a uniform surface structure while the surfaces may have irregular roughness which considers maximum roughness depth k smax (Gulich 2010; Tuzson 2000) in actual scenario.

(2) The utilization of diamond points yielded higher mean roughness, while diamond paste yielded lower mean roughness values.