Sentence examples for mean process time from inspiring English sources

In the literature, it is common to consider setup times 20 40% of the mean process time.

The mean interval time parameter follows the Poisson distribution and is calculated as follows: a = frac{{mu_{text{p}} times mu_{text{g}} }}{U times M}, (22 where μ p is the mean process time of every job at each stage, μ g the mean number of non-skipped stages of each job, U the percentage of workshop utilization and M the mean of the total number of machines in the shop.

Regarding expression temperature, its reduction to 25°C leads to energy saving, meanwhile induction at absorbance 0.8 means shorter process time.

That is, the observations are a zero-mean process with time-varying log-variance that one wants to estimate.

This allows us to study heat transfer in lab-scale fluidized beds consisting of about 57 000 and 95 000 particles (Tp,0= 90°C,Tgas,in= 20°C), respectively, at 1/300 of the runtime of conventional CFD-DEM simulations on the same hardware with hardly distinguishable evolutions of particle mean temperatures even after 60s process time.

f Evolution of the droplets density and mean diameter as a function of process time.

Mention individual process time.

His work is used to quantify the robustness of MapReduce applications under different system parameters, such as the number of processes, the mean time between failures (MTBF) of each process, failure recovery cost, etc. Authors like Jiang [9], performs a depth study of factors that affect the performance of MapReduce applications.

Being an important factor during the producing process, the mean residence time (MRT) of particles inside PRHE was investigated.

Results suggested that if the polymerisation is to be carried out by a reactive extrusion process whose mean residence time is less than a few minutes, it is recommended that the polymerisation temperature be higher than 220 °C.

Because of the relatively low initial allowance rate and these lengthy appeals processes, the mean determination time for allowed applicants significantly exceeds that of denied applicants (Autor et al. 2011).